Looking for a Howdens Daytona Oak door with professional fitting included? This five-panel internal door combines the warmth and natural variation of American white oak veneer with a stable engineered construction. Grafton Carpentry supplies and fits Daytona Oak doors throughout Leicester, Hinckley and locations within roughly one hour of Leicester.
The displayed price starts at £192 per door and includes standard fitting. A protective oiling option is also available for £30 per door. Select the closest door size above, or choose “Not Sure” if you would like us to assess the opening.
About the Howdens Daytona Oak door
The Daytona is an oak-veneered internal door with a clean five-panel appearance and a textured woodgrain. Its warm tone works well with traditional timber features, neutral colour schemes and contemporary interiors that need a natural material to soften the space.
This door is not made from solid oak throughout. It uses an American white oak veneer over an engineered particleboard or timber core, depending on the size and specification. This construction provides the appearance and natural grain of oak while offering the stability expected from a modern internal door. Because real veneer varies, the grain and colour will not be identical from one door to another.
Unfinished Daytona Oak door and oiling options
The standard Daytona Oak door is supplied unfinished. After preparation and any permitted fitting adjustments, it must receive a suitable protective finish in accordance with the manufacturer’s instructions. Suitable options may include a compatible varnish, stain or door oil, depending on the appearance you want and the manufacturer’s recommendations.
If you select the £30-per-door oiling protection option, we can include the additional treatment as part of the job. If you do not select it, the door still needs to be protected correctly after installation; unfinished does not mean ready for long-term use without a coating.
Clear or lightly tinted finishes usually retain more of the natural oak character, while an appropriate stain can alter the tone. Always remember that oak veneer absorbs products differently and the final colour may vary from samples. We can discuss the intended finish before your doors are ordered.
Professional Daytona Oak door supply and fitting
Internal door openings are rarely identical, even within the same property. Existing frames can be out of square, previous doors may have been altered and different openings can require different sizes. Our supply-and-fit service checks the requirements before the final order and provides one point of contact through to installation.
- Door openings and existing frames assessed before ordering
- Correct door size and handing confirmed
- Door prepared within the manufacturer’s permitted tolerances
- Hinges, latch and a suitable standard handle fitted and aligned
- Clearances checked for smooth, reliable operation
Suitable standard handles, hinges and a latch are included with a fitted-door job. Upgraded hardware, locks, frame repairs, unusual alterations and other non-standard requirements will be identified clearly in your quotation.
Available sizes and fitted Daytona Oak door price
The product options cover a selection of common imperial and metric sizes. The final quotation depends on the selected size, number of doors, condition of the existing frames and any made-to-measure or bi-fold requirements. Grafton Carpentry currently provides doors as a complete supply-and-fit service; a full supply-only service is not yet available.
You can also explore our wider oak internal door range if you would like to compare the Daytona with alternative panel layouts, glazed designs or pre-finished options.
Interior door fitting around Leicester
We fit internal doors in Leicester, Hinckley, Burbage, Lutterworth, Market Bosworth, Loughborough, Coalville, Coventry, Tamworth, Market Harborough and many surrounding locations within approximately one hour of Leicester. See our areas we cover page or ask us to check your postcode.
Frequently asked questions
Is the Daytona Oak door solid oak?
No. It has an American white oak veneer over an engineered particleboard or timber core. This gives the appearance and natural grain of oak with a stable modern construction.
Does the Daytona Oak door need to be sealed?
Yes. The standard door is unfinished and needs a suitable protective treatment after preparation and fitting, following the manufacturer’s instructions.
What does the £30 oiling option include?
It adds oiling protection to the door as part of the job. We will confirm the chosen treatment and expected appearance before work begins.
Does the £192 price include fitting?
Yes. The displayed price starts at £192 per door and includes standard fitting. The final quotation will identify any non-standard frame work, upgraded hardware or unusual alterations.
What if I do not know the correct size?
Select “Not Sure” when requesting your quote. We can assess the openings and confirm suitable sizes before the doors are ordered.
Get a fitted Daytona Oak door quote
Tell us how many doors you need, whether you want oiling protection and where the property is located. We will help confirm the sizes and provide a clear supply-and-fit quotation.
